Journal – Nano Composite Materials Lab

H. J. Kwon, B. S. Jo, J. S. Cho* "Synthesis of prussian blue analogue derived (Co,Fe)Se2/reduced graphene oxide/carbon nanofibers as anodes for sodium-ion batteries" (2026) (Submitted)

1. D. S. Jung, S. K. Hong, J. S. Cho, Y. C. Kang, "Spherical shape BaO-ZnO-B2O3-SiO2 glass powders prepared by spray pyrolysis" in Appl Phys A– Mater. 89(2007)769.

📄 yeah.jpg 다운로드

40. J. S. Cho, Y. C. Kang, Large scale production of yolk-shell β-tricalcium phosphate powders, and their bioactivities as novel bone substitutes. Physical Chemistry Chemical Physics

39. J. S. Cho, K. M. Yang, Y. C. Kang, Yolk–shell structured Y2O3:Eu3+ phosphor powders with enhanced photoluminescence properties prepared by spray pyrolysis. CrystEngComm

38. J. S. Cho , Y. C. Kang, Large-scale production of fine-sized Zn2SiO4:Mn phosphor microspheres with dense structure and high photoluminescence property by spray-drying process. RSC Advances

37. J. S. Cho, K. Y. Jung, M. Y. Son, Y. C. Kang, Large-scale production of spherical Y2O3:Eu3+ phosphor powders with narrow size distribution using a two-step spray drying method. RSC Advances

36. J. S. Cho , Y. C. Kang, Advanced yolk–shell hydroxyapatite for bone graft materials: Kilogram-scale production and structure-bioactivity relationship. RSC Advances

35. J. S. Cho, J. C. Lee, S. H. Chung, J. K. Seo, S. H. Rhee, Effect of grain size and density of spray-pyrolyzed hydroxyapatite particles on the sinterability of hydroxyapatite disk. Ceramics International

34. J. S. Cho, D. S. Yoo, Y. C. Chung, S. H. Rhee, Enhanced bioactivity and osteoconductivity of hydroxyapatite through chloride substitution. Journal of Biomedical Materials Research Part A

33. J. S. Cho , D. S. Yoo, Y. C. Chung, S. H. Rhee, Enhanced osteoconductivity of sodium-substituted hydroxyapatite by system instability. Journal of Biomedical Materials Research Part B: Applied Biomaterials

32. J. S. Cho , S. H. Rhee, Formation mechanism of nano-sized hydroxyapatite powders through spray pyrolysis of a calcium phosphate solution containing polyethylene glycol. Journal of the European Ceramic Society

31. J. S. Cho , H. S. Kim, S. H. Um, S. H. Rhee, Preparation of a novel anorganic bovine bone xenograft with enhanced bioactivity and osteoconductivity. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 101B(2013)855.

30. J. S. Cho , S. H. Rhee, The size control of hydroxyapatite particles during spray pyrolysis. Key Engineering Materials, 529(2013)66.

29. J. S. Cho and S. H. Rhee, The densification mechanism of hydroxyapatite particles during spray pyrolysis with variable carrier gas rates of flow. Journal of Biomedical Materials Research Part B: Applied Biomaterials 100B(2012)493.

28. J. S. Cho , S. H. Rhee, Preparation of submicron-sized hydroxyapatite powders by Spray Pyrolysis Key Engineering Materials. 215(2012)493-494.

27. J. S. Cho , C. P. Chung, S. H. Rhee, Bioactivity and osteoconductivity of biphasic calcium phosphates. Bioceramics Development and Applications 1(2011)1.

26. J. S. Cho, Y. N. Ko, H. Y. Koo, Y. C. Kang, Synthesis of nano-sized biphasic calcium phosphate ceramics with spherical shape by flame spray pyrolysis. Journal of Materials Science: Materials in Medicine. 21(2010)1143.

25. J. S. Cho, D. S. Jung, J. M. Han, Y. C. Kang, "Nano sized α and β-TCP powders prepared by high temperature flame spray pyrolysis" in Materials Science and Engineering: C 29(2009)1288.

24. J. S. Cho, Y. N. Ko, D. S. Jung, H. C. Jang, M. J. Lee, Y. C. Kang, "Characteristics of size controlled hydroxyapatite powders with nanometer size prepared by flame spray pyrolysis" in Journal of the Ceramic Society of Japan 117(2009)1060.

23. J. S. Cho, Y. N. Ko, H. Y. Koo, M.-J. Lee and Y. C. Kang, "Effects of solvent on the properties of nano-sized hydroxyapatite powders directly prepared by high temperature flame spray pyrolysis" in Journal of Ceramic Processing Research 10(2009)628.

22. J. S. Cho and Y. C. Kang, "Synthesis of spherical shape borate-based bioactive glass powders prepared by ultrasonic spray pyrolysis" in Ceramics International 35(2009)2103.

21. D. S. Jung, J. S. Cho, H. Y. Koo, Y. C. Kang, "Characteristics of Ce0.6Tb0.4MgAl11O19 phosphor powders prepared by high temperature flame spray pyrolysis" in Journal of Alloys and Compounds 472(2009)367.

20. J. S. Cho, D. S. Jung, S. K. Hong, Y. C. Kang, "Size control of Pb-based glass powders between 38 and 84 nm in the flame spray pyrolysis" in Journal of electroceramics 23(2009)236.

19. J. S. Cho, I. A. Kim, C. P. Chung, S. H. Rhee, Bioactivity and Osteoconductivity of HAp/TCP Composite, 치과기재학회지 36(2009)43-46.

18. D. S. Jung, S. K. Hong, J. S. Cho, Y. C. Kang, "Morphologies and crystal structures of nano-sized BaxSrxTiO3 primary particles prepared by flame spray pyrolysis" in Materials Research Bulletin 43(2008)1789.

17. D. S. Jung, S. K. Hong, J. S. Cho, Y. C. Kang, "Nano-sized barium titanate powders with tetragonal crystal structure prepared by flame spray pyrolysis" in Journal of the European Ceramic Society 28(2008)109.

16. J. S. Cho, D. S. Jung, Y. C. Kang, "Fine-sized BaMgAl10O17 Eu2 phosphor powders with plate like morphology prepared by AlF3 flux assisted spray pyrolysis" in Journal of the Ceramic Society of Japan 116(2008)584.

15. J. S. Cho, S. K. Hong, D. S. Jung, Y. C. Kang, "Effects of solvent on the properties of nano-sized glass powders prepared by flame spray pyrolysis" in Journal of the Ceramic Society of Japan 116(2008)334.

14. J. S. Cho, S. K. Hong, D. S. Jung, Y. C. Kang, "Characteristics of nano-sized Pb-based glass powders by high temperature spray pyrolysis method" in Journal of the Ceramic Society of Japan 116(2008)600.

13. S. K. Hong, D. S. Jung, J. S. Cho, Y. C. Kang, "Characteristics of ZnO–B2O3–CaO–Na2O–P2O5 glass powders prepared by spray pyrolysis" in Journal of Non-Crystalline Solids 354(2008)3012.

12. J. S. Cho, D. S. Jung, J. M. Han, Y. C. Kang, "Spherical shape hydroxyapatite powders prepared by flame spray pyrolysis" in Journal of Ceramic Processing Research 9(2008)348.

11. J. S. Cho, D. S. Jung, S. H. Lee, Y. C. Kang, "Morphological and optical characteristics of BaMg0.9Al10O19Mn2+ phosphor powders prepared by flame spray pyrolysis" in Journal of Ceramic Processing Research 9(2008)83.

10. J. M. Han, D. S. Jung , J. S. Cho, and Y. C. Kang, Spherical shape BaNd2Ti5O14 powders prepared by spray pyrolysis Journal of the Ceramic Society of Japan 116(2008)1360.

9. J. S. Cho, Y. C. Kang, "Nano-sized hydroxyapatite powders prepared by flame spray pyrolysis" Journal of Alloys and Compounds 464(2008)282.

8. S. K. Hong, D. S. Jung, J. S. Cho, Y. C. Kang, "Effect of alkali metal on the properties of Bi-based glass powders prepared by spray pyrolysis" in Applied Physics A 90(2008)733.

7. 조중상, 이상호, 강윤찬, " Effects of the Characteristics of Precursor Powders and AlF 3 Flux on the Properties of Blue-Emitting BAM: Eu Phosphor Powders " in 한국재료학회지, 18(2008)137.

6. 조중상, 구혜영, 이상호, 강윤찬, " Green-Emitting Silicate Phosphor Under Long Wavelength Ultraviolet Prepared by High Temperature Flame Spray Pyrolysis " in 한국재료학회지, 18(2008)77.

5. J. S. Cho, S. K. Hong, D. S. Jung, Y. C. Kang, "Spherical shape PbO-B2O3-SiO2 glass powders prepared by flame spray pyrolysis" in Journal of the Ceramic Society of Japan 115(2007)483.

4. J. S. Cho, S. K. Hong, D. S. Jung, J. M. Han, Y. C. Kang, "Formation of BaMgAl10O17Eu phosphor particles with spherical shape and filled morphology in the flame spray pyrolysis" in Journal of the Ceramic Society of Japan 115(2007)530.

3. J. M. Han, H. Y. Koo, J. S. Cho, D. S. Jung and Y. C. Kang, "Terbium-doped lanthanum phosphate phosphor particles with a submicrometre size and spherical shape" in Journal of Ceramic Processing Research 8(2007)359.

2. S. K. Hong, H. Y. Koo, D. S. Jung, J. S. Cho and Y. C. Kang, "Preparation of Pb-based glass powders by spray pyrolysis using a filter expansion aerosol generator" in Journal of Ceramic Processing Research 8(2007)248.

1. D. S. Jung, S. K. Hong, J. S. Cho, Y. C. Kang, "Spherical shape BaO-ZnO-B2O3-SiO2 glass powders prepared by spray pyrolysis" in Appl Phys A– Mater. 89(2007)769.